BMLHM - ULTRABASE 7 BASECOAT, NON-LEAD COLORS
- MSDS: BMLHM
- Manufacturer: SHERWINS WILLIAMS COMPANY
- Product Name: ULTRABASE 7 BASECOAT, NON-LEAD COLORS
- National Stock Number: 8010-00F021218
Product Identification
Product ID:ULTRABASE 7 BASECOAT, NON-LEAD COLORS
MSDS Date:09/14/1987
FSC:8010
NIIN:00F021218
MSDS Number: BMLHM
Responsible Party
CLEVELAND, OH 44115
Emergency Phone: (216) 566-2917
Info Phone: (216) 566-2902
Cage: GO035
Contractor
Telephone: (216) 566-2902
Cage: GO035
Ingredients
ETHYL BENZENE
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: <5%
OSHA PEL 435 MG/CUM
ACGIH TLV: 434 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 30-35%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC C8-C10 (AROMATIC
CAS: 64742-95-6
Fraction By Weight: <5%
ACGIH TLV: 100 PPM
BUTYL ACETATE (N-BUTYL ACETATE)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 15-45%
OSHA PEL 700 MG/CUM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHYLENEGLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE
CAS: 112-07-2
RTECS: KJ8925000
Fraction By Weight: 0-5%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM
TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
ACRYLIC MODIFIED ALKYD POLYMER
Fraction By Weight: 25-35%
CELLULOSE, ACETATE BUTYRATE *91/4*
CAS: 9004-36-8
Fraction By Weight: <5%
7.8-9.2 LBS/GAL
RTECS: 9999999WG
KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: <5%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 0-5%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS, ITCHING OR
BURNING SENSATION. INHALATION: RESPIRATORY SYSTE, NERVOUS SYSTEM
DEPRESSION, UNCONSCIOUSNESS, DEATH, HEADCHE, DIZZINESS, NAUSEA, &
LOSS OF COORDINATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSES PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. PROLONGED
OVEREXPOSURE TO SOLVENTS MAY CAUSE ADVERSE EFFECTS TO THE LIVER,
URINARY, BLOOD FORMIN G, CARDIO-VASCULAR, & REPRODUCTIVE SYSTEMS.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:INHALATION: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
BREATHING. KEEP WARM/QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY
W/SOAP & WATER. EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:58-75F
Lower Limits:0.5%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE INCLUDING SELF-CONTAINED
BREATHING APPARATUS. WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP, POSSIBLE AUTOIGNITION,
EXPLOSION & HEAT. FLAMMABLE, FLASH <100F.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENITLATE &
REMOVE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:USE ONLY W/ADEQUATE VENTILATION. AVOID
BREATHING VAPOR/SPRAY MIST, CONTACT W/SKIN & EYES. WASH HANDS AFTER
USING. CONTENS ARE FLAMMABLE.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. DON'T TAKE
INTERNALLY. KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE HARMFUL
OR FATAL. USE APPRO VED BONDING/GROUNDING PROCEDURES.
Exposure Controls
Respiratory Protection:IF PERSONAL EXPOSURE CAN'T BE CONTROLLED BELOW
APPLICABLE LIMITS BY VENTILATION, WEAR A PROPERLY FITTED ORGANIC
VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA FOR PROTECTION
AGAINST MATERIALS.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF
THE EXPOSURE TO MATERIALS IS MAINTAINED
Eye Protection:SPECTACLES W/UNPERFORATED SIDESHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
WHEN SANDING OR ABRADING THE DRIED FILM, WEAR A DUST MASK OR
PARTICULATE RESPIRATOR. BOILING RANGE: 255-395F.
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume: 75%
Stability
Stability Indicator/Materials to Avoid:YES
METALLICA CONTAIN ALUMINUM, CONTAMINATION W/WATER, ACIDS, OR ALKAKIS
CAN CAUSE EVOLUTION OF HYDROGEN.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, & OPEN
FLAME, SOURCES OF IGNITION, HOT SURFACES.
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS
DEFINED UNDER THE RCRA. WASTE MUST BE TESTED FOR IGNITABILITY TO
DETERMINE THE APPLICABLE EPA HAZARDOUS WASTE NUMBERS. INCINERATE IN
APPROVED FACILITY. DON' T INCINERATE CLOSED CONTAINER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.